Welding Wires_Products

On Site Liquid Nitrogen Generator
The raw air is compressed to 0.7~0.85MPa by the air compressor, and then the air is pre-cooled to 5~10°C in the pre-cooling unit to separate most of the water. The remaining water, carbon dioxide and hydrocarbons are filtered out by adsorption in the cryo
Zhejiang Shenger Gas Equipment Manufacturing Co., Ltd [Verified]

Negotiable
Inquiry

800KG Caliper Low Pressure Press Casting Machine
● Suitable for caliper and control arm● Top plate stroke 800-2600 mm● Totally up to eight cores and big side cores cylinder drivers.● Specification and form of holding furnace: crucible holding furnace 800/1500Kg
Jiangsu Tian Ding Fine Machinery Co., Ltd [Verified]

Negotiable
Inquiry

Isostatic Graphite
Cargo name: isostatic graphite block, Isostatic graphite round, Isostatic graphite rod, Isostatic graphite plateRaw materials: High quality pitch coke/petroleum cokeDie-molded
Hefei Hil Material Technology Co.,Ltd. [Verified]

Negotiable
Inquiry

Automatic Boom Barrier System
On the basis of absorbing essence of similar products at home and abroad, the company has researched and developed this DC brushless Automatic Boom Barrier System.
Zhejiang Joytech Electronics Co., Ltd. [Verified]

Negotiable
Inquiry

Compression Moulding Hydraulic Presses
Compression Moulding Hydraulic Presses is used to produce car roof, car carpet, door inner molding, trunk baffle, thermal insulation material etc. It’s usually frame structure. Portable worktable is optional.
Wuxi Meili Hydraulic Machine Factory [Verified]

Negotiable
Inquiry

Welding wire factory
Main chemical component: C:0.40~0.60 Si:0.30~0.90 Mn:0.80~1.80 Cr:3.00~5.00 W:0.50~0.90 Others:0.50~1.50 Hardness:46~51HRC Application: All kinds of hot rolling flat roll. Welding flux: SJ303 Nantong Ace welding produces all kinds of over...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Stainless steel welding wire factory
ACE-1141-S Main chemcial component: C:0.04~0.012 Si:0.30~0.80 Cr:11.50~14.50 Ni:3.50~4.50 Mo:0.80~1.20 Hardness: 38~45HRC Application: Exclusive used for Continuous caster roller(SMS.DEMAC Standard) Welding flux: SJ203 Nantong Ace weldi...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

RT-60B RT-60 US Type Electrode(Wire Rods) Drying Oven-60kg
US Type Electrode Drying Oven RTSeries(RT-60B RT-60) Specification: 1.All Modes NO. of RT Series:RT30 RT60B RT60 RT100. 2.Inner Tube: It is Stainless Steel sheet, Stainless Steel Heating Tube. 3.Widely usedin electricity power,mechanism,metallur...
Wenzhou Reto Welding Technology CO.,LTD [Verified]

Negotiable
Inquiry

All kinds of welding wire factory
ACE-463-S Main chemical component C:0.45~0.65 Si:0.30~0.80 Mn:0.10~0.50 Cr:3.00~5.00 Mo:2.00~2.50 Others:6.00~7.00 Hardness：55~65HRC Application: Hot rolling work roll Welding flux: ACE-SJ203 Nantong Ace welding produces all kinds of overl...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Welding wire factory
ACE-6131-O ACE-6131-S Main chemical component C:1.00~1.50 Si:0.50~1.20 Mn:13.00~15.50 Cr:1.20~5.50 Others:2.00~3.00 Hardness：180~220HB Application: Crusher roller,hammer crusher,jaw plate and roller of jaw crusher etc. Welding flux: ACE-SJ2...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Submerged arc welding wire factory
ACE-D72F-O Main chemical component C:4.80~5.50 Si:1.00~1.30 Mn:0.40~0.70 Cr:22.00~24.00 Mo:2.50~3.50 W:0.80~1.20 V:0.40~0.60 Nb:4.50~5.50 Others:0.20~0.50 Hardness：62~65HRC Application: Possess low impact resistance and excellent resistan...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

KY-450T US Type Electrode(Wire Rods) Drying Oven-204kg
Automatic Control Far-infrared Electrode Oven (KY-450T) Specification: 1.All Modes NO. of ZYHC Series:ZYHC-20 ZYHC-30 ZYHC-40 ZYHC-60 ZYHC-100 ZYHC-150 ZYHC-200 ZYHC-300 ZYHC-500 2.Inner housing: stainless steel good for erosion resistance. 3.H...
Wenzhou Reto Welding Technology CO.,LTD [Verified]

Negotiable
Inquiry

Welding wire produce factory
5) ACE-328-S Main chemical component: C:0.25~0.50 Si:0.30~0.70 Mn:1.00~1.80 Cr:1.00~4.00 Mo:7.50~9.00 Others:0.50~1.50 Hardness:42~47HRC Application: Blast furnace hopper,hot rolling tool,wrapper roll etc. Welding flux: SJ303 Nantong Ace...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Mig welding wire factory factory
Main Chemical Component: C:0.20~0.40 Si:0.20~0.60 Mn:1.00~2.00 Cr:2.00~2.80 Mo:0.15~0.30 Hardness:150~220HB Application: Crawler wheel,die,gear, mould etc. Welding flux: SJ203 Nantong Ace welding produces all kinds of overlaying hardfacing f...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

CO2 Gas Shielded Welding Wire ER70S-6
CO2 Gas Shielded Welding Wire ER70S-6 Brief Introduction: CO2 Gas Shielded Welding Wire ER70S-6 has excellent technological properties such as smooth steady feeding, fast melting iatej high depositing efficiency, little sparer and beautiful se...
Shandong Chengjiang Welding Industry Co.,Ltd [Verified]

Negotiable
Inquiry

K415 Metal Spool Submerged Arc Welding Wire
1) Correspond to AWS EM 12 2) EM 12 are low carbon steel wire,which are the largest usage of submerged arc welding wire Quality: 1. ISO certification 2. Large scale, Leading skills, Advanced equipment ect...
Shandong Zander Resourcing Company Limited [Verified]

Negotiable
Inquiry

Negotiable
Inquiry

Welding wire price China factory
ACE-6137-O ACE-6137-S Main chemical component C:0.80~1.50 Mn:12.00~15.50 Cr:5.50~9.50 Others:2.00~3.00 Hardness：250~300HB Application: Rail surface and said rail(turning place) of trolley and train etc. Welding flux: ACE-SJ203 Nantong Ace w...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Submerged arc welding wire factory
Ace-D06 Main chemical component C:0.08~0.20 Si:0.30~0.60 Mn:0.80~1.50 Cr:0.20~1.00 Mo:0.25~0.50 Hardness:240~280HB Application: Conveyor chain,metal plate,gear and axle etc. Welding flux: SJ203 Nantong Ace welding produces all kinds of over...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

Flux cored welding wire factory
ACE-6517Ni-O ACE-6517Ni-S Main chemical component C:0.05~0.25 Si:0.08~1.50 Mn:5.00~7.00 Cr:18.00~22.00 Others:1.00~4.00 Hardness：140~200HB Application: Wear plate of digging bucket,track of railway and trolley car etc. Welding flux: ACE-SJ2...
Nantong Ace Welding Co.,Ltd [Verified]

Negotiable
Inquiry

All Categories